Pilt on illustratiivne
Nupu moodul, LilyPad
Tootekood: BUTTON-MODULE-LILY
- 1.00 €
-
- Püsikliendile 0.95 € -5%
- Logi sisse ja saad vähemalt 5% soodustust
Pealadu
Tallinn, Peterburi tee 90F
Tallinn, Peterburi tee 90F
23 tk
Peterburi tee Oomipood
Tallinn, Peterburi tee 90F
Tallinn, Peterburi tee 90F
1 tk
Järve keskuse Oomipood
Tallinn, Pärnu mnt. 238
Tallinn, Pärnu mnt. 238
0 tk
Lõunakeskuse Oomipood
Tartu, Lääneringtee 39
Tartu, Lääneringtee 39
0 tk
Põhjakeskuse Oomipood
Rakvere, Haljala tee 4
Rakvere, Haljala tee 4
0 tk
Kaubamajaka Oomipood
Pärnu, Papiniidu 8
Pärnu, Papiniidu 8
0 tk
Pargi keskuse Oomipood
Jõhvi, Puru tee 1
Jõhvi, Puru tee 1
0 tk
The LilyPad Button Board Module is a very discrete small momentary push button switch. The LilyPad Button Board is intended to be used with the LilyPad Arduino 328 Main Board.This button board was designed to be low profile, without any sharp edges, and to be sewn onto fabric as a discrete button switch.
The LilyPad Button Board is a Normally Open (NO) contact. When the button is pressed it connects the two conductive sew pads and the circuit closes. Once the button is released the button springs back into its Normally Open position and the circuit opens again.
The LilyPad Button Board is an electronic component that controls the flow of current in a circuit. It is perfect to turn simple circuits on or off, or act as an input for a microcontroller (such as LilyPad Arduino 328 Main Board) to trigger behaviours in a program.
The LilyPad Button Board is a Normally Open (NO) contact. When the button is pressed it connects the two conductive sew pads and the circuit closes. Once the button is released the button springs back into its Normally Open position and the circuit opens again.
The LilyPad Button Board is an electronic component that controls the flow of current in a circuit. It is perfect to turn simple circuits on or off, or act as an input for a microcontroller (such as LilyPad Arduino 328 Main Board) to trigger behaviours in a program.
Model : LilyPad Button Board Module
2 Input / Output Pads
Operating Voltage : 3V – 5V
Type of Contact : Momentary Push Actuation (NO)
Quantity : 1 Piece
Dimensions :
Length : 15mm
Width : 8mm
Height : 3mm
