Touch switch / dimmer 10 ÷ 14 V DC, Exta Free

Image is for illustrative purposes only

Touch switch / dimmer 10 ÷ 14 V DC, Exta Free

SKU: WDN-01
Zamel
Pealadu
Tallinn, Peterburi tee 90F
0 pcs
Peterburi tee Oomipood
Tallinn, Peterburi tee 90F
0 pcs
Järve keskuse Oomipood
Tallinn, Pärnu mnt. 238
1 pcs
Lõunakeskuse Oomipood
Tartu, Lääneringtee 39
0 pcs
Põhjakeskuse Oomipood
Rakvere, Haljala tee 4
0 pcs
Kaubamajaka Oomipood
Pärnu, Papiniidu 8
0 pcs
Pargi keskuse Oomipood
Jõhvi, Puru tee 1
1 pcs
The WDN-01 device is used to switch on or switch off the light by means of a touch. The switch has a sensor with 1,5 m long wire, which is connected to conductive components of lighting fittings. The WDN-01 switch is supplied with 1 ÷ 14 V DC. It has a PWM output for a direct connection of LED diodes and the output of NO free relay with a maximum load of 5 A. It is possible to switch on / switch off any receiver (conventional light bulbs, halogens) by means of the relay output. Using the PWM output the brightening / dimming function is also available, apart from switching on / switching off. The relay output operates in parallel way with the PWM output. WDN-01 has small casing dimensions and is designed for surface mounting. It is recommended to use WDN-01 to control lighting in the kitchen and bathroom furniture. The device can also be installed on flammable materials, e.g. wood, furniture boards and plasterboard.

Power supply 10 ÷ 14 V DC

Power consumption 0,25 W

Number o channels 1

Output current load PWM – max 2,5 A

Output resolution PWM 9-bit

Relay output current load – max 5 A / 250 V AC

Sensor’s length 1,5 m

Relay contact 1xNO 5 A / 250 V AC 1250 VA AC1

Type of The relay output Volt free - NO

Section of connecting cables Up to 2,5mm2

Ambient temperature range -10° ÷ +55 °C

Protection degree IP20

Overvoltage category III

Dimensions [mm] 47,5 x 47,5 x 20

Weight [g] 55

Manual WDN-01 GB
Download