Designer moving mechanisms Mechanical model Aviator, vinyl 726 parts

If the childhood dream of flying in heaven is still alive, but difficulties arise with entering the flight school, do not rush to hide your aerobatic helmet and glasses. Following your dream, Ugears rises to a new height and offers not one, but two entire air models in one Aviator set.

Model Characteristics

The model includes three modules: aircraft, helicopter and main control remote controller. Select the aircraft, install on the bar - and take off! If you are a newcomer pilot, you should start with a helicopter that is easier to control than an airplane, but no less interesting. In your turntable there is a cockpit with opening doors, a three-blade bearing and tail screws and everything you need for excellent leisure time.

To control a high-speed aircraft requires some skill. This mini-model is designed according to the aerodynamic scheme of a bracing biplane with a 5-piston rotary air-cooled engine. Learning to fly this wayward bird is not easy, it can take several flight-hours. But it will be hours of unforgettable experiences! In addition, after some practice with a flexible and comfortable helicopter, you will already have some experience, and you will not have to start from scratch.

Flight control

Ugears mini-models, as always, are entertaining and interesting, but the main element of the set is the control remote controller - a complex device equipped with a high-speed engine, which gives a drive through the turret with an automatic skew to rotate the aircraft with a counterweight. Control is performed by means of levers:

control wheel controls inclination along roll and pitch of aircraft by means of skew machine.

engine control stick (TCL) controls engine RPM by setting aircraft speed.

Also, for the correct operation of the skew machine, the control remote controller is equipped with a fine manual setup system.

When all three modules are assembled, the mini-model is installed on the bar, and you can't wait to spread the wings - time to start the motor. The maximum model plant is 25 half-revolutions of the valve. We put the left hand on the "TCL," and the right hand on the control wheel, with the nameless and middle finger of the left hand, raise the "TCL" position retainer up and start the aerobatic model with smooth forward movement.

Leave all doubts on earth and - forward and up conquer heaven with the model "Aviator" from Ugears.