4000W AC voltage regulator with Insurance shell

Shape: Same as the picture show

1. Type: BTA41600B

2. Size: 85mm x 80mm (LxW)

3. Maximum power: 4000W (resistive load limit power), long time should be reduced power use.

4. Efficiency: more than 90%

5. Working voltage: AC 220V

6. Adjust the voltage: AC 10-220V

Note that the load must be re-regulator.

Thyristor is mainly used for resistive load (electric wire incandescent

lamp, etc.), single-phase AC motor can also be, but not guaranteed can,

other types of load, please confirm the buyer. Fuses are not omnipotent

and have a reaction time. If the current is too large, the module may burn

out in addition to burning the fuse.

Note that the plastic cover on the connector due to the installation of

the shell, can not be completely opened, the screwdriver to point to point

twist, the other open to be careful, too much easy to break off the lid,

express transport may also be crushed, Does not affect the use of the

module.The use of 1.6 thick FR-4 high temperature circuit board, the circuit design is reasonable, and the use of thicker welding design, even if the high current through enough to deal with, the use of more secure and more reliable.

Using the standard 35A 4-bit post, so that the real 4000W design. (Two into two more convenient wiring).Circuit after several technical improvements, selected each of the accessories, is now fully mature technology.