Remote Controller 4 Channels 868,3MHz

Deleting pilot memory: Press and hold A and B at the same time - after two seconds the LED flashes three times. Release the B button and quickly press and release 3 keys (A button must be pressed continuously). After a moment the blue LED will flash rapidly. Let go of both buttons. The remote's memory has been erased (after pressing any button, the blue LED will not light up).

Copying signal: To start copying, previously saved button codes (see "Deleting the Remote Memory") have to be deleted from the remote control. Bring both hands together and press the button you want to copy - the diode flashes slowly 3 times and then flashes quickly which means the button was copied correctly. Repeat the operation with the other remote control buttons. Keep in mind that both remote controls must be very close together and must have a functioning battery.

Restoring memory: At the same time press button 3 and 4 - the LED flashes three times and after a while flashes quickly. It means that the memory was restored correctly.